For the reason that display of iPhone 6 plus has been enlarged to 5.5 inches, the potential for breaking it has also been enlarged. If unfortunately you broke your iPhone 6 plus screen, official restore will cost you up to per week exclude the time you make the appointment. So in case you are expert enough, replacing the iPhone 6 plus broken display your self is a better choice. Right here we'll stroll you through a 5 minutes DIY restore guide for replacing the broken iPhone 6 plus damaged screen.

Cracked the iPhone 6 display? No fear! Simply comply with this step by step IPhone Screen Digitizer 6 screen alternative information, it's solely a ten mins work!

Please word: This course of was done by our experts who've years of experience of take apart telephones, and we used the part which already have those small elements pre-assembled. This publish is in no way a reference for these who're expert sufficient to repair their iPhone 6+, do that at your individual risk, etradesupply is not going to be answerable for any injury happened during the repair process.

Instruments Wanted:
Pentalobe Screwdriver
PH00 Philip Screwdriver
A Pair of Tweezers
Suction Cup Software
Case Opening Tool

Step 1. Shut down your iPhone 6 plus before you do anything. (Be sure you’ve done this before the disassembly begins, or it's possible you'll trigger quick circuit of the interior parts of the phone which may harm the motherboard)

Step 2. Undo 2 screws on the bottom with the help of the Pentalobe Screwdriver. (We advocate you to use a magnetic pad for putting those screws in case dropping them)

Step 3. Stick the suction cup on the underside of the cellphone and then pull out the broken screen. (If your display has already shattered badly, use clear adhesive tape to cover the surface of the display to avoid any additional injury)

Step 4. Undo 5 screws holding the steel cowl, then take the metal cover out.

Step 5. Disconnect the digitizer flex cable connector, LCD display flex cable connector, entrance facing camera connector and home button flex cable connector. (If what you get is the iPhone 6 plus digitizer and LCD screen assembly with dwelling button, frame and entrance facing digicam, you then simply need to put the brand new one on)

Step 6. Undo the 3 screws holding the house button retaining bracket then pick it up.

Step 7. Pry up the house button flex cable connector then remove the home button.

Step 8. Undo the 3 screws that holding the metal cover on the ear speaker.

Step 9. Take out the retaining bracket, ear speaker and front going through camera.

Step 10. Undo the 7 screws that locking the LCD metal plate.

Step 11. Pry up the LCD back plate connector.

Step 12. Replace your broken display screen with the new one.

Observe: We strongly recommend you to check the function of the new iPhone 6 plus digitizer and LCD display screen assembly earlier than you install it on. In the event you unfortunately get the defective part, you might ask your provider to exchange for a brand new one.